2019 High quality Single Stage Rotary Vane Vacuum Pump - Semi Automatic Blow Molding Machine – Joysun Detail:
JKA-2
JKA-2A
JKA-5
JKA-5A
JKA-20
JKA-20H
Features:
Semi- automatic blow moulding machine is the latest model developed by our company. It is suitable for blowing PET bottles All the machine movements are controlled by computer, pneumatic transmission. High precision of time delay, high reliable operation, strong resistance for disturb, easy for setting time and long service life。Digital automatic temperature adjusting instrument;Two operation modes: single action, and semi-automatic Oven adopts the method of heating by far infrared quartz lamps.Controlling temperature of electrothermal lamps using electronic voltage-adjust , that is using bicolor LED digital controlled silicon to adjust its voltage.
Bottle blowing device
The two sets of bottle blowing device are located at the upper front of the machine frame. It is composed of extending bar cylinder， bottle-mouth pressing cylinder, blowing pressing-lump and extending bar, etc. When compressed air comes in, the pistons of extending bar cylinder and bottle-mouth pressing cylinder will go down at the same time, the blowing lump will press the bottle mouth very tightly by adjusting itself according to the height of the bottle mouth. Thus there will be no air leak while blowing, the final product turn to be crystal bright.
Mould-closing device
It is located in the middle part of the machine and is composed of mould-closing cylinder, moving template and fixed template, etc. Two halves of the mould are fixed on the fixed template and moving template respectively. Mould-closing cylinder drives moving template and mould move to and from by connecting bar in order to fulfill the action of mould opening & closing.
Operation part
The operation part of main machine is located at the right front of the machine, equipped with electric control box, where all electric devices are installed. Thereare power key-switch, power pilot lamp, manual & semi-automatic selection switch, semi-automatic start push-button, up & down switch of extending rod And blowing pressing-lump, blowing & discharge push-button on the panel of control box. So, it is easy to control .
Air passage system
The air source can be supplied by centre of pump station or single compressor.This machine has two 2-position 5-way electromagnetic valves which control opening & closing mould, up & down of extending bar, up & down of piston of bottle-mouth pressing cylinder. Two 2-position 2-way electromagnetic valves control the air blowing & discharge towards the mould.
Configuration：
PLC: MITSUBISHI
Interface & touch screen: MITSUBISHI or HITECH
Solenoid：BURKERT or EASUN
Pneumatic cylinder：FESTO or LINGTONG
Filter regulator/lubricator combination：FESTO or SHAKO
Electric component： SCHNEIDER or DELIXI
Sensor： OMRON or DELIXI
Inverter：ABB or DELIXI or DONGYUAN
Technical Specification:
|
ITEM |
DESCRIPTION |
JKA-2 |
JKA-2A |
JKA-5 |
JKA-5A |
JKA-20 |
JKA-20H |
||
|
Capacity |
Max. Bottles/hour |
600-800 |
1000-1600 |
300-400 |
600-700 |
600-800 | 1200-1400 |
40~45 |
80~100 |
|
Bottle |
Max. Volume (L) |
2 |
2 |
5 |
2 |
5 |
2 |
20 |
20 |
| Max.Diameter (mm) |
105 |
105 |
190 |
110 |
110 |
110 |
280 |
280 |
|
| Max. Height (mm) |
330 |
330 |
350 |
350 |
350 |
350 |
520 |
520 |
|
|
Blow Mold |
Cavity |
2 |
2 |
1 |
2 |
1 |
2 |
1 |
1 |
| Thickness (mm) |
155~160 |
155~160 |
260 |
260 |
360 |
360 |
|||
|
Preform |
Neck Size (mm) |
Ф28-Ф32 |
Ф28-Ф32 |
Ф28-Ф130 |
Ф28-Ф130 |
|
|
||
| Max. opening stroke (mm) |
135~150 |
135~150 |
230 |
230 |
390 |
390 |
|||
| Max. stretch length (mm) |
340 |
340 |
330 |
330 |
540 |
540 |
|||
| Heating Power (kW) |
4.2 |
4.2 |
~8 |
~8 |
8 |
~17.2 |
|||
| General Power (kW) |
11.2 |
11.2 |
~15 |
~15 |
8 |
~32.2 |
|||
| Max. Air Pressure (MPa) |
0.8 |
0.8 |
0.8 |
0.8 |
0.8 |
0.8 |
|||
|
Max Blow air. Pressure (Mpa) |
3 |
3 |
3 |
3 |
3 |
3 |
|||
|
Main machine Dimensions |
Unpacked (m) |
1.14*0.55*1.65 |
1.06*0.54*1.6*2 |
1.7*0.7*2.19 |
1.7*0.7*2.19*2 |
2.40*0.84*2.86 |
2.50*0.86*3.02 |
||
|
Heating Unit |
Unpacked (m) |
1.60*0.68*1.62 |
1.60*0.68*1.6*2 |
1.73*0.68*1.62 |
1.73*0.68*1.6*2 |
1.44*0.86*1.51 |
2.25*1.17*1.95 |
||
| Machine weight | N.W. (Kg) |
350 |
700 |
1000 |
2000 |
2800 |
2800 |
||
|
Heating Unit |
N.W. (Kg) |
200 |
200 |
400 |
400 |
1000 |
1200 |
||
Product detail pictures:
Related Product Guide:
To meet the customers' over-expected satisfaction , we have our strong team to provide our best overall service which includes marketing, sales, designing, production, quality controlling, packing, warehousing and logistics for 2019 High quality Single Stage Rotary Vane Vacuum Pump - Semi Automatic Blow Molding Machine – Joysun , The product will supply to all over the world, such as: Nicaragua, Kuala Lumpur, Rotterdam, Our company sticks to the principle of "high quality, reasonable price and timely delivery". We sincerely hope to establish good cooperative relationships with our new and old business partners from all parts of the world. We hope to work with you and serve you with our excellent goods and services. Welcome to join us!
By Ellen from Georgia - 2018.07.27 12:26
The accounts manager made a detailed introduction about the product, so that we have a comprehensive understanding of the product, and ultimately we decided to cooperate.
By Nydia from Gambia - 2017.05.02 11:33
Products categories
-
Factory Cheap Small Injection Blow Molding Mach...
-
High Performance Shrink Wrap - X-63 Single Sta...
-
Best-Selling Shrink Wrapping Machine - Shrink ...
-
Wholesale Discount Water Ring Vacuum Pump - Sc...
-
Special Price for Full-Auto Injection Molding M...
-
PriceList for Vacuum Evaporation - X-63 Single...
