With the capacity of 800 per hour, Jar automatic blow molding machine can blow the bottles of the volume 0.2-5L, and the neck diameter from Ф28 to Ф130.

Features:

Automatic blow molding machine is designed uniquely with the innovative and reasonable mechanical structure. During the whole producing process, the bottles mouth faces down to avoid being overheated in the process of heating, which extends the application widely used. We adopt the cheap compressed air as driving power, applying the updated PLC technology to control automatically; presetting parameter, built-in self-diagnosis, alarm and LCD display function. Touch-screen is adopted human interface, friendly and visible which is easy to learn. 

Heating tunnel

Preform heating structure is made up of three sets of heating tunnel in serials and one blower. Each heating tunnel has been installed with 8 pieces of far ultra red and quartz lighting tube which are distributed on each side of the heating tunnel.

Mould-closing device

It is located in the middle part of the machine and is composed of mould-closing cylinder, moving template and fixed template, etc.  Two halves of the mould are fixed on the fixed template and moving template respectively.

PLC control system

PLC control system can watch on the preform temperature and if all the actions are finished according to the setting programs, if not, the system will stop automatically to avoid fault expanding. Besides, there are fault reason tips on the touch screen.

Blow structure

Thanks to adopting bottom-blow structure, the bottle mouth is always facing down to be prevented from the pollution of dust and dirtiness.

Air separation system

the blowing air and working air is separated from each other. . If the customer is able to use the clean blowing air, it will ensure the production of bottles clean at most.

Configuration：

PLC: MITSUBISHI

Interface & touch screen: MITSUBISHI or HITECH

Solenoid：BURKERT or  EASUN                                                                              

Pneumatic cylinder：FESTO or  LINGTONG

Filter regulator/lubricator combination：FESTO or SHAKO

Electric component： SCHNEIDER or DELIXI                                                             

Sensor： OMRON or DELIXI

Inverter：ABB or DELIXI or DONGYUAN

Technical Specification: